5. Types of microphones Fixed microphones
Microphones in fixed positions, for instance as mounted in tables, lecterns or in the ceiling, are often preferred in installations. Wiring is concealed and the microphone/loudspeaker distance is constant. The only thing that varies is the ‘object’ in front of the microphone – the person speaking – which as a matter of fact, changes the sound field around the microphone. Handheld microphones
Handheld microphones, wired or wireless, are sometimes a necessity. For trained speakers this is not a problem. However, untrained speakers may hold the microphone at the wrong distance from their mouth or point it in the wrong direction. In many installations, the handheld microphone is just a spare microphone for situations not accounted for. Headset microphones
Headset microphones are efficient because of their position close to the mouth. This is often preferred for speakers that have to move around the room during their presentations, for instance in front of a white board or a screen.
There are several models of headset mics to choose from. You must consider which features are important. The omnidirectional headset is the easiest to handle because the sound is very consistent (almost) independent of positioning and is the least sensitive to wind/pop and handling. A cardioid microphone must be kept in a stable position.
Dual ear headsets are very efficient. However, the single ear solution often better accommodates microphone changes between speakers and – depending on hair style – does not give the user a bad hair day. Lavalier types
Lavalier types of microphones are common. It should be noted that the level of speech is some 10 dB lower (compared to a position at the cheek) because the mic is positioned on the chest of the speaker. Another important issue with lavalier microphones is that the 2-4 kHz frequency range, is reduced, which decreases speech intelligibility. Directional lavalier types may apply, however they must be pointed in the right direction.
6. Placing the microphone The importance of placement optimization
The general rules of microphone placement are:
- As close to the source (person speaking) as possible (but be aware of heavy breathing and plosives)
- As far as possible from other microphones
- As far as possible from the loudspeakers
- Never directed toward loudspeakers
- No potential possibility to get obstacles between the speaker and mic (like manuscripts)
On conference tables and lecturns a mobile table stand can be used – especially if holes cannot be drilled into. Table mount – lectern / pulpit
A table mount is practical because the microphone has a fixed position. A gooseneck may help to point the microphone in the right direction. The length of the gooseneck is determined by the position of the speaker: standing or sitting. Floor stand
Floor stands seldom apply in fixed installations. Although a floor stand can provide a base for a handheld microphone. Ceiling, suspended
Suspending microphones from the ceiling is often a practical solution. The microphones are (almost) out of sight. The microphones are normally also out of reach physically, thus there is no handling noise. Ceiling suspended microphones should be highly directive. Distance between mics
A common rule (the 1:3 rule) is that when using a microphone, other open microphones should be at least three times further away (from the first mic). This is to prevent colorization of the sound (comb filtering).
7. Get rid of vibrations Structure-borne noise
Sound can be transmitted by rigid structures like a tabletop. So if a microphone is placed on a table, the mechanical vibrations caused by objects hitting the table may end up as sound in the system.
To prevent vibrations from entering the microphone, it should be mechanically isolated from the structure it is attached to.
In principle, most isolation takes advantage of elastic suspension. The structure vibrates but the microphone is steady. It sounds easy, however any elastic suspension has a resonance. Hopefully, the resonance is designed to be at a very low frequency, below the frequency range of speech. Below the resonance frequency, the movement of the supporting structure (table or lecturn) and the suspended microphone is exactly the same. At the resonance frequency, the movement of the microphone is much higher than the movement of the structure. Above the resonance frequency, the damping of the elastic suspension sets in. Table Shock Mount
The TSM4001 Table Shock Mount is a very efficient solution for table mounting a DPA d:screetTM or d:dicateTM microphone. It offers the best shock rejection available of any integrated mount. Vertical softness absorbs handling vibration. Horizontal movements are controlled to prevent the podium boom from touching the mount. Best performance is obtained with mics weighing between 140 g (5 oz) and 240 g (8.5 oz). Shock mounts for stands
It is also possible to apply a shock mount for the microphone on top of a mic stand. This solution works but looks slightly less elegant.
8. Mixing the microphone signals Manual mixers
All the microphones must be balanced and turned on/off when needed. A mixing device – and a person behind it – can do the job. However, many installations imply full- or partly-automatic mixing. Auto-mixers
Most conference rooms are designed to run without any technicians present. Users are left with a small panel to control light, projectors, curtains and sound. When more than one mic is in use there is a need for some control. The auto-mixer is the solution.
Auto-mixers have a built-in sensing of active channels. Active channels are turned on; inactive ones left off. Priority circuits can determine which microphones should be open. An automatic level setting will reduce the level of each microphone as more microphones are switched on.
In larger setups for conferences, priority management can be very complex to allow the right person to speak at the right time.
9. Connecting the microphones Noise-free connections
Connections should be completely free of noise. That goes for contacts, switching microphones on/off, etc. The wiring (and the mics) should not pick up and reproduce any electromagnetic noise, neither LF nor RF. Nothing is more annoying that unwanted sound in the system. Cables
Some microphones may have unbalanced cables (miniature microphone housing without a built-in connector). However, the unbalanced cabling should be kept as short as possible. The main analog audio cabling should always be balanced. Wireless applications for installation
Wireless transmitters can be applied for all bodyworn microphones. Microphones in movable pulpits can also benefit from applying wireless systems. This leaves the stage free of wires. Digital Network
Conference systems with digital signal distribution are getting more common. IP-addresses are assigned to the individual microphones or the microphone bases. Still, signal distribution has to be done correctly.
10. System check and calibration Polarity of the microphones
According to the standards, microphones should deliver positive voltage on the “hot” pin for positive pressure in front of the diaphragm. Unfortunately, some microphones are manufactured to deliver negative voltage for a positive pressure. If all microphones in an installation have the same polarity – positive or negative – this is not a problem. However, applying a mixture of types may cause problems. Check the polarity of all microphones with a polarity checker or the like. Gain setting (gain before feedback)
A microphone system should be stable with no tendency to create acoustic feedback. Unfortunately, feeds may still occur. A good rule is to leave some headroom in the system. Especially in cases where the people speaking move very close to the microphone. The presence of any object like the head or torso of a person may change the apparent directivity of the microphone. Further, all microphones in a line, for instance covering a panel, should have the same sensitivity to enable easy gain setting. Number of open microphones
The number of open and amplified microphones should be kept at a minimum. Doubling the number of open microphones reduces the headroom by 3 dB. Also, more open microphones pick up more background noise from the room. The absolute level
The purpose of the microphone system is to bring the voice of the person speaking closer to the listener. This is why the reproduced SPL should not exceed conversational SPL. Also worth knowing: speech intelligibility decreases when the listening level exceeds approximately 80 dB SPL.
High quality microphones, proper calibration and alignment makes the sound system work at its best.
Mehr zum Thema
Auf Microphone University finden Sie viele weitere interessante Inhalte. Die folgenden Artikel behandeln zusätzliche interessante Technik-Themen.